Manage SNMP access for c7000 enclosures

Adding access for an SNMP manager

1. From the main menu, select Logical Interconnects or Logical Interconnect Groups, select the logical interconnect, and then do one of the following:

   • Select Actions→Edit.

   • Click the Edit icon.

2. In the SNMP view, click Add SNMP access.

3. Enter the IP address or subnet of the SNMP manager.

   	NOTE: Both IPv4 and IPv6 addresses are supported.

4. Click Add, or click Add + to add access to other SNMP managers.

5. Click OK.

6. To verify that the specified SNMP access was added, locate the SNMP access information in the SNMP view.

Editing access for an SNMP manager

1. From the main menu, select Logical Interconnects or Logical Interconnect Groups, select the logical interconnect, and then do one of the following:

   • Select Actions→Edit.

   • Click the Edit icon.

2. In the SNMP view, click the Edit icon in the SNMP access row for the address to edit.

3. Make any changes to the IP address.

   	NOTE: Both IPv4 and IPv6 addresses are supported.

4. Click OK to apply your changes.

5. Click OK.

6. To verify that the specified SNMP access was changed, locate the SNMP access information in the SNMP view.

Removing access for an SNMP manager

1. From the main menu, select Logical Interconnects or Logical Interconnect Groups, select the logical interconnect, and then do one of the following:

   • Select Actions→Edit.

   • Click the Edit icon.

2. In the SNMP view, click the Delete icon in the SNMP access row for the address to remove.

3. Click Yes, remove to confirm the deletion.

4. Click OK.

5. To verify that the specified SNMP access was removed, make sure the access no longer displays in the SNMP view.