Quick Start: Configure a c7000 enclosure and server blade for direct attach to an HPE 3PAR Storage System

This quick start describes the process for adding and configuring an enclosure so that its servers can connect to an HPE 3PAR Storage System that is directly attached (Flat SAN) to the enclosure with Virtual Connect FlexFabric interconnects.

Prerequisites

Required privileges: Infrastructure administrator or Network administrator for adding the networks.
Required privileges: Infrastructure administrator or Server administrator for adding the enclosure and server profiles.
The HPE 3PAR Storage System is installed and configured and the cables are attached to the enclosure you want to use.
See Prerequisites for bringing a c7000 enclosure into HPE OneView for prerequisites and preparation you must complete before you add an enclosure.
See Prerequisites for bringing server hardware into an appliance for prerequisites and preparation you must complete before you add a server.

Configuring a c7000 enclosure and server blade for direct attach to an HPE 3PAR Storage System

Resource	Task	Description
Networks	Add the Fibre Channel direct attach networks.	When you add the networks from the Networks screen: For Type, select `Fibre Channel` For Fabric type, select `direct attach` For more information about networks, see the online help for Networks or the REST API scripting help for networks and network sets.
Logical Interconnect Groups	Create a logical interconnect group that defines the uplink sets for the direct attach network connections.	Choose a name for the logical interconnect group that helps you distinguish logical interconnect groups that have connections to direct attach Fibre Channel networks from other logical interconnect groups. You add uplink sets as part of creating the logical interconnect group. Ensure that the uplink sets use the uplink ports on the enclosure that are physically connected to the HPE 3PAR Storage Server. For more information about logical interconnect groups, see the online help for Logical Interconnect Groups or the REST API scripting help for logical interconnect groups.
Enclosure Groups	Create an enclosure group.	Choose a name that helps you distinguish enclosures that use direct attach Fibre Channel connections from enclosures that use fabric attach Fibre Channel connections.
Enclosures	Add the enclosure.	Select Add enclosure for management. Select the enclosure group that you added in the preceding step. Select a firmware baseline and an HPE OneView Advanced licensing option.
Server Profiles	Do one of the following: Create a server profile and assign it to the server hardware. Copy a server profile, edit it as necessary, and then assign it to the server hardware. After you configure the HPE 3PAR Storage System, power on the server hardware.	For a server blade to connect to the HPE 3PAR Storage System, it must have a server profile assigned to it, and that server profile must include at least one connection to the direct attach Fibre Channel network that connects to the storage system. For example, if the networks you added are `Direct A` and `Direct B`, ensure that the server profile has one connection to the `Direct A` network and one connection to the `Direct B` network. You enable SAN storage through the server profile, in addition to other configuration settings. You must add storage systems, add storage volumes, and then attach to volumes when you create the profile. For more information about server profiles, see the online help for Server Profiles or the REST API scripting help for server profiles.

prev	up	next
Quick Start: Add a c7000 enclosure with multiple logical interconnect groups and connect its server hardware to networks	home	Enclosure Groups